Spill Containment Berms
Ice Removal Products

 

1932 PTF - PRIMARY AND SECONDARY CONTAINMENT OF AROMATIC HYDROCARBONS
1932 PTF Standard Metric
Coating - Type Polyester based polyurethane
Base - Type Nylon
Base - Weight (nominal) 13.0 oz/yd2
 441 g/m2
Finished Coated Weight
ASTM D-751		 32.0 oz/yd2
±2 oz/yd2		 1085 g/m2
±70 g/m2
Thickness
ASTM D-751		 0.034 in 0.86 mm
Grab Tensile
ASTM D-751		 800/750 lbf/in 3560/3338 N
Strip Tensile
ASTM D-751 Procedure B		 650/550 lbf/in 579/490 daN/5 cm
Adhesion
ASTM D-751 Dielectric Weld		 50 lbf/in 45 daN/5 cm
Hydrostatic Resistance
ASTM D-751 Procedure A		 800 psi 5.52 MPa
Bursting Strength
ASTM D-751
Ball Tip		 1200 lbf 5340 N
Low Temperature
ASTM D-2136
1/8" mandrel, 4 hr		 Pass -50°F Pass -46°C
Dead Load
MIL-T-52983E (modified)
Para 4.5.2.19		 2 in seam, 4 hr, 1 in strip
250 lbf @ 70 °F
125 lbf @ 160°F		 5 cm seam, 4 hr, 2.5 cm strip
1112 N @ 21°C
556 N @ 71°C
Abrasion Resistance
ASTM D-3389
H22 wheel/1000g load		 10,000 cycles (min)
before fabric exposure
Permeability
ASTM D-814
Fuel B		 0.05 fl. oz/ft2/24 hr 19.1 ml/m2/24 hr

 

We believe this information is the best currently available on the subject. We offer it as a suggestion in any appropriate experimentation you may care to undertake. It is subject to revision as additional knowledge and experience are gained. We make no guarantee of results and assume no obligation or liability whatsoever in connection with this information. In case of conflict between standard and metric specifications, standard shall apply.