Anti-Slip Floor Finish

Hard Glow Anti Slip Floor Finish shines with a "wet look" high gloss scuff and slip resistant anti slip Floor Finish Shine.

Metal interlocked acrylic polymer anti slip floor finish is super strong yet buffable and easily removable. This anti slip floor finish goes down shiny and is self polishing and detergent resistant.

Highly Recommended for use on all vinyl, vinyl asbestos, composition, terrazzo and linoleum floors.

Features Hard Glow Anti Slip Floor Finish:

1. Anti-Slip
2. Resist scuffing
3. No yellowing
4. Non powdering
5. Self polishing
6. Seals and finishes
7. High gloss
8. Easily removable
9. Cross linked with metal atoms

Anti Slip floor finish application:

1) Always apply to a clean surface, Scrub heavily soiled areas.

2) Apply on thin coat of Anti Slip Floor Finish with a clean long string mop. Allow 20 minutes to dry. If using for first time apply a second thin coat for ultimate non slip floor finish with high gloss.

3) Dries to a tough gloss without buffing, but may be buffed if higher gloss is desired.

4) Easily stripped with good quality wax stripper.

Daily care: Resists scuffing, black heel marks and ground in dirt so it requires minimum care. Dry or damp mop to maintain shine. For maintenance of anti slip floor finish it may be rinsed 3 to 1 with water.

For industrial and Institutional use only

SEE MORE ON: Anti slip floor finishes and coatings