Trowel or Brush on non slip / anti slip paint: Including permanent non skid coatings for indoor floor or outdoor uses. Helps provide slip resistance on concrete floor, wood, metal and more!
 The ultimate in slip proof protection & chemical resistance. A 6 gallon pail containing resin, hardener and aggregate for the strongest possible Skid Proofing on concrete, metal, fiberglass and more. Simply mix up 2 part paint, roll down and broadcast the aggregate over it in a
uniform fashion. This 100% Epoxy Non Slip coating Kit can be used to prevent accidents on sidewalks, ramps, trucks, production areas driveways, basement floors, bricks and stones, steps and more. Designed for use on floor areas which are subjected to abrasive traffic, impact and/or corrosive spillage. Easy to apply this paint, yet tough enough to stand up to heavy vehicular traffic - even fork lift trucks on floor areas. This permanent non skid coating can be paint to help prevent slip accidents and saves down time by eliminating slippery areas in any work environment even if covered in liquids. (Epoxy Paint Non Slip Coatings are Available in Clear, Black, Blue, Yellow as well as custom matched floor colors.) Easy to clean & permanent bond to concrete, metal, unfinished wood and more. For uses indoors and outdoors on sidewalks, walkways, floors, equipment and much more. Call 1-800-474-7294 for ordering information.
Easy To apply!!! Produces a very hard and durable slip-resistant surface. This skid proof coating requires no mixing and apply a permanent non skid surface with just a roller or brush. Comes in a wide range of colors. For use to slip proof and accident prevention on sidewalks, ramps, trucks, production areas driveways. floors. steps, and More. Good for inside paint and concrete areas. Packed in 5 gallon paint pails and ready to use.
Any Questions, Please call us at 1-800-474-7294
AEROSOL SPRAY ON SLIP-RESISTANT EPOXY NON SLIP COATING  A super hard one part epoxy non slip coating that quickly cures to a slip resistant surface with a rough grit that is easy to use and requires no tools mixing of chemicals to provide a safe non-skid surface. Aids in the reduction of slip and fall accidents. This unique aerosol contains special synthetic grit with no sharp edges. Available in several Non-Slip paint colors. Just spray paint it down on almost any hard surface accept for rubber. May need to be re-applied as needed. Aerosol paint leaves surface like a diving board surface.
A slip-resistant, epoxy non slip coating that cures to a hard, flat, textured finish. Designed for interior and exterior use on concrete, steel, wood, fiberglass, aluminum and other surfaces where a slip-resistant finish is desired. EFFECTIVE ON: Steps, ramps, loading docks, ladders, running boards, showers, bathtubs, around machinery or anywhere water or other slippery conditions exist. SURFACE PREPARATION: The floor or surface applying should be dry, clean and free of oil, wax, dirt, loose paint and/or other contaminants. Previous areas that have paint already should be cleaned with a mild cleaner, rinsed and dried. Before initial non slip coating application to surface, a light etch or sanding is recommended. Test a small area for compatibility and adhesion. The coating is self-priming on most surfaces. DRY TIME: Non Slip coating dries to touch in approximately one hour. Make sure first coat is dry before applying second coat. The rate of cure will vary with the film thickness, temperature and humidity. Wait 24 hours before subjecting to heavy foot traffic. Application will continue to cure for several days. Recoat or re-paint every 3 to 6 months depending on wear. USE DIRECTIONS: For best results apply with ambient temperatures between 60°F to 90°F. Shake the paint can until ball rattles freely and then for an additional 60 seconds. Epoxy paint must be mixed well before and during use to achieve the correct color and texture. For best results shake can periodically during use. Spray non slip coating in a sweeping motion at a distance of 12 to 15 inches from area to be treated. 1-800-474-7294 Toll Free Have questions? Contact us using our online forum! Three different non skid coatings to choose from. Traction-N-More a permanent two part epoxy skid proofing paint. Safety Seal an easy to use roll non-slip floor protection. Sure Foot Non Slip Coating is an aerosol spray paint, perfect for floor, ladders, steps, bumper
and any area where a fast easy to apply non slip coating, paint or finish is needed. | 
