Rust Converter - Rust Treatment

Rust Converter Treatment Control

Safety Cabinets

Weed Control

Coatings

 [1 Step Info] [Rust Converter FAQ] [1 Step M.S.D.S] [1 Step Data Sheet]

"1" STEP (THE RUST KILLER)  converter treatment neutralizes existing rust and acts as a smooth long lasting primer on both rusted metal and previously painted surfaces. "1" STEP (THE RUST KILLER) can be sanded, top coated, body puttied or left as is.

 

Clean surface from grease, dirt and oil.

Remove loose rust.

Paint the converter directly on top of rusted area. 

 

 It quickly kills rust and neutralizes it completely. Water based "1" STEP rust converter works by a chemical reaction to eliminate rust and covers up to 500 sq. ft. per gallon. See before and after converter in action pictures below.

 

Apply "1" STEP TREATMENT (THE RUST KILLER) to any rusted surface. "1" STEP penetrates and neutralizes the rust. White when applied and then dries into black protective coating as seen in after photo. After Rust Converter Treatment

Applying  "1" Step 

BEFORE PHOTO: Apply "1" STEP (THE RUST KILLER) to any rusted surface. "1" STEP treatment penetrates and neutralizes the rust. White when applied and then dries into long lasting black protective coating.

After Two Years

AFTER PHOTO: After two years the untreated metal underneath has rusted away. "1" STEP treatment continues to protect the metal section above it. The final color of black may vary depending on stage of rust this paint is used on.

 

 

Another quality product from Interstate Products, Inc. 

 

Currently in use by: government, industrial and personal users all over the world for more then 10 years.

You will have the option to purchase THE RUST KILLER below

Please call for questions or bulk discounts.

1-800-474-7294.

Most orders are shipped within 1 to 2 business days by UPS or larger quantities by truck line system.

 

Advanced production tools and high volume allow us to keep our standards higher and our prices considerably lower then the competition.

 

"1" STEP THE RUST KILLER

Converts rust into an inert polymer and long lasting protective coating. Kills Rust Dead!

"1" STEP (THE RUST KILLER) is the cost effective long lasting and safe to use rust converter control treatment that eliminates sandblasting, heavy wire brushing or use of toxic acid penetrates.

 

  • For use on: structures, machinery, equipment, vehicles, railings, marine applications, and more.

  • ( To prepare surface: simply remove any loose rust, grease or oil and paint on with roller or brush. )

  • Dries in 30 minutes into a black protective coating.

  • Gives 2 to 4 x the rust protection of an acrylic or enamel paint  without a top coat. You may top coat for added protection.

  • Clean painting tools right away and use just soap and water for clean up.

  • Field and lab tested.

  • Safer to use then latex paint.

  • If spilled on concrete-wash with soap and water immediately as "1" Step Rust Converter is extremely difficult to remove.

*Please note "the color of black" can vary depending on the type and stage of the rust.

Neutralizes, primes and provides long lasting rust protection in one easy treatment!

 Features:
▪ Non-Flammable-Low VOC
▪ Water Based Treatment
▪ Approved for use on all non-food contact surface
▪ Protects against future corrosion
▪ Non-Toxic and emits no harmful fumes
▪ Easy to use
▪ May be top coated with paint
▪ Eliminates and kills rust

To order by phone or if you have questions, please call us at 1-800-474-7294.

"1" STEP (THE RUST KILLER)

info@interstateproducts.com

Rust Remover