STYLE 8130 XR

STYLE 8130 XR^Ž-3PW FOR POTABLE WATER APPLICATIONS
NSF 61 Approved

8130 XR^Ž-3PW fabric

Standard

Metric

Coating - Type

Elvaloy^Ž-based XR^Ž-3compound

Base - Type

Polyester

Base - Weight (nominal)

6.5 oz/yd²

220 g/m²

Finished Coated Weight
ASTM D-751

30.0 oz/yd²ą 2 oz/yd²

1017 g/m²
ą 70 g/m²

Trapezoid Tear
ASTM D-4533

35/35 lb_fmin.

156/156 N min.

Grab Tensile
ASTM D-751

550/550 lb_{f min.}

2450/2450 N min.

Adhesion
ASTM D-751 Dielectric Seam

10 lb_f/in min.

9.0 daN/5 cm min.

Hydrostatic Resistance
ASTM D-751, Procedure A

800 psi min.

5.51 MPa min.

Bursting Strength
ASTM D-751 Ball Tip

650 lb_f

2892 N

Dead Load
MIL-T-52983E (modified)
Para. 4.5.2.19

2 in seam, 4 hrs, 1 in strip
210 lb_f @ room temp.
105 lb_f@ 160° F

5 cm seam
935 N @ room temp
467 N @ 71° C

Low Temperature
ASTM D-2136
1/8 in mandrel, 4hrs

pass @ -30° F

pass @ -34° F

We believe this information is the best currently available on the subject. We offer it as a suggestion in any appropriate experimentation you may care to undertake. It is subject to revision as additional knowledge and experience are gained. We make no guarantee of results and assume no obligation or liability whatsoever in connection with this information. In case of conflict between standard and metric specifications, standard shall apply.