Concrete Resurfacing and Patch Kits

Fix Cracking Concrete and Fill Holes

Flaking Concrete Repair

Resurfacing

Floor and Spalling Repair

POWER-PATCH

Code - IPI # 670

For most general and lasting patch / repairs: A concrete patch repair kit packed in a 5 gallon mixing bucket and includes epoxy resin, hardener, and aggregate for the strongest possible repairs for patch and resurfacing on concrete. This 100% epoxy concrete patch & repair kit is used on plant floor, garage floor, sidewalks, driveways, basement floor, bricks, stones, steps and almost any floor or wall application. Excellent  also for use on floor areas which are subjected to heavy abrasive traffic, high impact and corrosive spillage. Bonds to concrete, metal, wood, & more. Just mix up and trowel patch down onto concrete surface for long lasting filler and bonding action. * Most popular repair kit.

When resurfacing only is required, mix parts A and B only and roll down or skim coat with a trowel. Power Patch may be feathered down to 1/16 of an inch. Use for permanent repair jobs with easy instruction on product label. With Power Patch no extra bonder is needed. 24 to 48 hour dry time in warm weather. Uses include inside and outdoor repair.

RAPID-CONCRETE PATCH

Code - IPITZ-RP1

IPITZ-RP1 RAPID-CONCRETE PATCH

A Super fast drying concrete patching, repair and resurfacing kit with a 5 gallon pail, resin & hardener with aggregate for the strongest possible patch on concrete. This 100% concrete patch, resurfacing & repair kit is used on plant floors, sidewalks, driveways, basement floor. bricks and stones, steps and walls, etc. where minimal down time is required. Ready for traffic in under 30 minutes.  Designed for use on concrete floor areas which are subjected to heavy abrasive traffic, high impact and corrosive spillage.

Patch will bond to concrete, metal, wood, & more.

Use for repair with minimum dry time required and for areas that need to be in use within 1/2 hour. No extra bonder is needed.

For concrete repair work that requires immediate dry time.

VERTICAL & OVERHEAD PATCH

Code - TZ-10-99VO

# TZ-10-99VO Vertical and Overhead Patch

Concrete repair compound for vertical and overhead patching.

A concrete patch designed for resurfacing and repairing concrete and masonry surfaces. Kit contains all you need for wall or overhead patching binder. It makes a mixture applied over a dampened surface at an average thickness of 1/8”. Water proofing patching kit. See label for full instructions on all patch and resurfacing applications. For use in areas where a permanent repair patch or concrete resurfacing  and a overhead patch is needed. Ready for immediate UPS shipment.

EPOXY PATCH KIT SEALER

Code - IPI 680

#IPI 680 EPOXY PATCH KIT SEALER

A concrete patching and repair kit containing resin and hardener. No aggregate. Use for concrete patch, resurfacing and repairs on hard surfaces. May be brushed or rolled on to floors for a protective and extremely hard surface during repairs. This can be used for repairs on stone surfaces, in plants. on bricks and stones to create a protective floor seal . Can also be used to fill and patch cracks, holes, breaks, and cracks. Helps to water proof and create a chemical resistant surface.

LOW TEMPERATURE /
FREEZER POLYESTER PATCH

Code - 1044 LT

#1044 LT - LOW TEMPERATURE / FREEZER POLYESTER PATCH / FOR REPAIR AND RESURFACING

Fast setting concrete patch repair with ability to be used in freezing temperatures during repairs. These patch products can be used to repair and for resurfacing concrete in freezer floor areas where the temperature must be below freezing point during and after application. Packed in 5 gallon bucket which also serves as mixing bucket. Stock item available for immediate UPS shipment.

CONCRETE BONDER

Code - IPIAC-274

#IPIAC-274 CONCRETE BONDER
Insure a sure bond.

Concrete bonder acrylic adhesive makes concrete resurfacing or repairs that hold. This concrete bonder aids repair and contains an exceptional acrylic polymer formulation that insures strong, permanent bond between new and old concrete, mortar or plaster. Just brush it on any clean, sound surface and apply the new cement mix. Use inside or outside. This product will increase bonding strength 8 to 10 times when applied as directed. Eliminates the need to chip or roughen the areas where  resurfacing or repair is desired.

PERMA-SEAL

IPI69-Perma-Seal An all new revolutionary coating that can be used on any surface. It will protect, preserve, and beautify with long-lasting durability. Use to restore the "wet look". Colorless - high gloss - hard protective finish that will resist oxidation, corrosion, salt, air and weathering. Waterproofs and protects grease and oil from adhering to coated surfaces.

Prevents Water Damage and Strengthens Concrete (Low Odor-Water-Based-Non-Flammable) A highly modified thermoplastic concrete sealer specifically engineered for use where a low odor sealer is required. Like occupied buildings, floor areas, underground tunnels and vaults. Functions as a barrier against water, corrosive chemicals, and wear exposure at the same time allowing the concrete to breath. This unique concrete resurfacing product actually hardens and extends the life of concrete. Won't make the floor slippery. User should fix or patch any existing cracks and holes in concrete floor or surface before application.

PC-69 Perma Seal

STONE SEAL

IPIAC-740 STONE SEAL...A clear acrylic coating for concrete, stone, slate and steel surfaces. This product will form a hard and durable waterproof coating and enhance the look of any masonry surface. This product provides longer life and resistance to wear from weather and sun.

User should fix or patch any existing cracks and holes in concrete floor or surface before application.

TZ-HYDROSHIELD WB has been primarily designed to seal masonry walls, concrete slabs, decks, concrete walls, and abutments from both water and chloride intrusion while providing for water vapor transmission (breathability).

User should fix or patch any existing cracks and holes in concrete floor or surface before application.

Proper concrete patching and resurfacing should be done prior to use of concrete sealers. User should fix or patch any existing cracks and holes in concrete floor or surface before application. See concrete patch kits above.

HYDROSHIELD WB Concrete Sealer is a solvent free silane modified siloxane which chemically bonds to the substrate. The highly hydrophobic chemical molecules are extremely small (17A) resulting in penetration depths of ¼ of an inch. This material is UV resistant and will not turn yellow. Provides a barrier to destructive carbonation.

Call for bulk discounts on all our concrete floor patch,
repair and resurfacing kits.

AC-740 Stone Seal