| Asphalt Patch
|
Industrial water cooling tower algaecide.Microbicide for industrial and/or re-circulating cooling water towers. Helps keep water cooling tower systems clear and free of visible algae, bacterial and fungal slimes.This product is designed to control algae and bacteria in cooling tower systems.DIRECTIONS FOR USE It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. INITIAL DOSE: Add 19 to 80.5 fluid ounces of this product per 1,000 gallons of water contained in the system to provide a concentration of 150 to 630 ppm of this product (15 to 63 ppm active quaternary). Repeat until control is evident. When system is in control, add: PERIODIC DOSE: 6 to 80.5 fluid ounces of this product per 1,000 gallons water contained in the system (5 to 63 ppm active quaternary) every 7 days or sooner should visible growth appear. For best results, clean heavily contaminated systems before treatment with this product. If soap or anionic detergent is used, rinse thoroughly before charging with this product. Apply this product at a point in the cooling tower system where uniform mixing will take place. When this product is used as directed, it will aid in controlling the development of biomass deposits and algae slime formation which are unsightly, produce foul odors and are often the cause of equipment breakdown and loss of cooling tower efficiency.ANY QUESTIONS, PLEASE CALL 1-800-474-7294 VIEW HVAC PRODUCTS
|
| Spill Pallets | Spill Berm | Drum Storage |
