COOLWIND™ PORTABLE COOLING PRODUCTS

COOLWIND™ PORTABLE COOLING PRODUCTS

If you have any questions, please call us at 1-800-474-7294

√ Affordable & portable HP cooling for any location or occasion

√ Each unit includes our unique CycleController™ for optimum
cooling in even the hottest & most humid climates

√ Maintenance-free pump

√ Corrosion-resistant

NEW MODEL COMING SOON!

*** $549 ***

PatioCooler™

Highlights: Our most economical HP cooling station ever. Our unique high-pressure micro-pump delivers over 18,000 Btu’s of cooling with this 3,400 CFM 18" highvelocity UL approved outdoor-duty pedestal fan. Cools up to 400 sqft by as much as 20°.

Includes: 340 PSI maintenance-free pump, exclusive Cycle-Controller™ optimizes cooling even in the most humid climates, GFCI circuit protection, thermal overload safety shut-off reduces pump failures, no pulsation, 1/8” HP port, 5x7x3 polycarbonate enclosure, in-line canister filtration, 20’ water supply line for hose bib connection or submerge in a bucket of water, 4-nozzle composite fan ring, accessory & mounting kit***, 100% factory tested, 1-year warranty

NEW!

*** $1,345 ***

EventCooler™

~ This is the portable
Cooler for any event ~

Highlights: Our most powerful HP cooling station ever. Our unique HP pump delivers over 100,000 Btu’s of cooling with this 7,400 CFM 24" high-velocity UL approved outdoor-duty pedestal fan. Cools up to 1,000 sqft by as much as 20°.

Includes: 900 PSI Pumptec maintenance-free pump, exclusive CycleController™ optimizes cooling even in the most humid climates, low pressure safety shut-off reduces pump failures, LP solenoid, pulsation dampening, by-pass unloader, 1/8” & 3/8” HP port, 9”x11”x7” Nema3R wall-mount fiberglass enclosure, 5” canister 15-micron absolute filtration, 20’ water supply line w/hose bib connection, AC receptacle, mounting kit*, 100% factory tested, 1-year warranty

Specifications PatioCooler™ EventCooler™
Pump Type Oscillating solenoid Duplex w/ pulsation dampening
Max. discharge pressure 340 PSI 900 PSI
Max. flow GPM at pressure 0.07 0.30
Max. inlet pressure – psi Suction to 70 70
Pump RPM 3600 cps 1550
Stroke n/a 0.075”
Bore n/a
Crankcase Capacity Oil-less, maintenance-free
Electrical
Motor - 115/230 VAC, 50/60 Hz – Hp (nominal) 1/15 1/6
Service factor n/a 1.35
Amp draw FLA 106 watts 1.3
Total unit amp load 112 watts 1.5
Motor RPM 3600 cps 1550
Construction Uniframe solenoid, auto thermal overload Permanent Magnet, ball bearing, auto thermal overload
Enclosure
Material UV protected polycarbonate w/SS hardware UV protected fiberglass w/SS hardware
Dimensions 5.25” w x 7.25” h x 3.25” d 9.3” w x 11.3” h x 6.9” d
Net weight 40 lbs. 18 lbs.
Shipping weight 44 lbs. 23 lbs.
Controls
CycleControl™ Yes Yes
Nozzles (Max. number @ 850 PSI output)
0.008”/0.2mm 4 @ 320 PSI 12/24
0.012”/0.3mm 2 @ 320 PSI 8/16
0.015”/0.4mm 1 @ 340 PSI 4/8
Max. Btu’s per unit 36,000 110,000
Coverage/nozzle (sqft)
0.008”/0.2mm 50 100
0.012”/0.3mm 75 150
0.015”/0.4mm 150 300
* Additional satellite fans (up to 2) may connected to this unit