Fire fighting full shop of supplies, fire fighting foams, tank savers,
engine cleaners
and truck care.
Keep the trucks clean and bright with the selected products below:
The ultimate in fire fighting supplies: Aluminum Cleaners
and Brighteners is a heavy duty cleaner to easily remove dirt and oxidation.
Restores Luster to aluminum surfaces. Heavy duty acid aluminum cleaners and
brighteners. Aluminum cleaners and Brighteners
Directions: Wear gloves, Dilute 1 part cleaner with up to 10 parts
water. Brush or swab onto surface to be cleaned. Allow time for aluminum cleaner
and brightener to penetrate soils and rinse thoroughly with water for bright
shine.
-
Degreaser and Engine Cleaner dissolves
heavy grease and oil deposits using a water rinse.
-
Degreaser and Engine Cleaners PREMIUM BLEND OF
SPECIAL LOW ODOR PETROLEUM SOLVENTS, EMULSIFIERS, WETTING AND RINSING AGENTS.
Degreaser and Engine Cleaners is a powerful emulsifiable
solvent degreaser for removing the heavy grease, dirt and grime from a wide
variety of surfaces. This multi purpose Degreaser and Engine Cleaners softens
and dissolves deposits of dirt and grime allowing it to be flushed away with
just a water rinse.
Excellent as fire fighting supplies and any other fleet
maintenance operations.
Degreaser and Engine Cleaners Application: Brush or spray
on Degreaser and Engine Cleaners onto the surface to be cleaned and let stand
for several minutes. Then simply flush off with water under pressure. A must in fire fighting supplies and fleet maintenance as
it can be used on fire tuck engines or in a parts washer.
Wash-N-Glow: High foaming, biodegradable penetrating
product that emulsifies dirt and grime and leaves fire trucks with glossy ,
spotless just waxed looking finish in one step. No buffing , no rubbing.
Natural Solution:
ORANGE CRYSTAL CONCENTRATE...Simply
our best of the fire fighting supplies cleaners. A powdered concentrated powder degreaser
with a high concentration of oil and dirt dissolving emulsifiers. Uses natural
citrus solvents to offer excellent degreasing and deodorizing. Use for concrete
cleanings, hard surface cleaning, truck cleaning and soak tank cleaning. The powder is orange
in color and becomes a light green grease cutting solution when mixed with
water. Mixes 100% with water. Simply either mix 1 lbs. with 5 - 10
gallons of water by bucket and brush or 1 lbs. with 40 gallons of
water by pressure washer. For stubborn stains- wet floor, sprinkle concentrate,
agitate and rinse. Removes the most stubborn stains. Smells great!
Any questions on fire fighting supplies or aluminum
cleaners and brighteners please call us at 1-800-474-7294. Ask about our Cool
Draft and Foam specials.
|
