Drum Rollers, Portable Drum Rotators and Drum Mixers

Roll a closed drum to mix and blend the contents with our industrial drum mixers. Compact, portable industrial drum mixer and drain stand rolls closed drum to agitate the contents. Mixin a sealed drum eliminates worker exposure and reduces clean up.

Features:
• Utilize important ingredients that would otherwise be in unmixed sediment
• Eliminate the hazards and clean up of messy transfer of contents.
• Roll a drum: 6" to 28" in diameter; Up to 40" tall (Note: the tipping lever will only engage a drum 30" or taller)

Drum Lifter, Below-Hook Drum Lifters

Hook drum lifters to move a drum with your hoist or crane. We carry Drum Lifters for almost any drum, please call us at 1-800-474-7294. Drum lifter for material handling safety.

Features:
• Drum lifter to lift drum and transport drum in upright position.
• Secured in the drum holder with a chain around the drum
• Handle steel, plastic or fiber drum: 23 " to 38" high; Up to 40" tall (Note: the tipping lever will only engage a drum 30" or taller)

Drum Carriers

Mobile-Karriers to raise, transport, rotate, tilt and rain a heavy 55-gallon drum. Drum carriers provide remarkable versatility! Drum carriers carry the full weight your drum. They allow you to rotate your drum 360 degrees, yet lock the tilt angle of a raised drum.

Features:
• Lock drum in vertical position to avoid spills
• Lock drum in horizontal position to pour
• When unlocked, the drum may be turned end-over-end to agitate contents or tipped and held manually at any angle.

Drum Palletizers and Drum Movers

Morse drum movers and drum palletizers to move rimmed drums on and off pallets up to 20 inches high.

Features:
• Move drums on and off pallets and spill containment pallets in upright position.
• The V-Shaped base of these drum movers allows you to raise and place a drum at the corner of pallets. Lift an upright drum 20" high.
• Power-Lift Options provide the most ergonomic means to raise drums. Drum movers are available with AC, DC or Air power-lift options.

Forklift Drum Carrier - Forklift Attachment

Forklift Attachments to Move and Pour Drum. Morse Forklift-Karriers convert your fork truck into a drum handler. More than just a Drum Dumper, controlled dispensing!

Features:
• Fork mounted drum handlers to allow fork truck operator to lift, transport, rotate and pour a heavy drum.
• Dispense drum of up to 2,500 lb (1136 kg).
• No tools needed • No power connections or turck modifications required
• Fork pocket openings are 24.5" apart, 2.5" high by 6.5" wide

Drum Pumps to Dispense 55gal Drums

Double-action piston drum pumps are self priming, delivering on both the forward and the back stroke. It takes less than 5 cycles to yield a gallon (3.8 liters).

Features:
• Two position pump handle: Handle can be mounted above drum pump or below; Much easier to operate on a truck or high tank
• Controlled discharge rate of approximately 1 quart on complete forward and backward cycle at 10 psi over 24 feet. Suction lift tested for 15 feet minimum. Discharge head up to 25 feet. Output head pressure is up to 10.83 psi.

Drum Heaters and Pail Heaters

More flexible heaters for drums and pails. These easy to use, flexible drum heatersprovide a simple, effective and reliable way to heat the contents of your drums. We have a drum heater for almost any steel, plastic or fiber drum. We even have heaters for 5-gallon pails.

Features:
• Heaters for metal drums have an adjustable thermostat for a control range 50° to 450° F. Heaters for plastic and fibers drums have a 50° to 160° F thermostat.
• Morse drum heaters provide more heating power over a larger surface area than other drum heaters on the market.
• Melt or preheat process ingredients. Control viscosity or temperature for handling processes.
• Protect against freezing. Speed flow of liquids.