MORStak Drum Rackers
Click here for a List of Models and Specifications >>
With the MORStak Drum Racker you can easily and safley lift a horizontal or upright drum from the floor, tilt it to horizontal, transport it, and set it into a drum rack up to 8.5 feet high. Then reverse the entire process to retrieve your drum from the rack.
MORStak replaces expensive lift trucks. It eliminates hazardous "bare
fork" handling of drums, upends and down-ends drums, and moves in tighter spaces. MORStak handles a drum with faucet and vent in place so the rack may serve as a multiple drum dispensing station.
The most dense racking is possible because drums need not be separated. Lifting arms fit easily into the spaces below the curvature of the drum. This enables the most efficient use of storage space. Designed to handle 55 gallon (210 liters) steel or plastic drum with suitable rim. This unit has a maximum capacity of 800 Lbs. (383 kg).
Two easy-to-use valve handles control the power lift and tilt functions. A visual indicator informs the operator of the recommended height for tipping drums. Special features prevent tilting drum from horizontal until operator secures drum in place. Choices of Air, AC, or 12V DC powered lift and tilt are available.
The rugged two-stage frame of the 620 Series provides a lift range for a four tier drum rack with a top shelf as high as 102" (259 cm). The single-stage 611 Series provides reach for a two tier drum rack with top shelf as high as 58" (147 cm).
Click here for a copy of this spec sheet >>
|
