Below-Hook Drum Karriers
Click here for a List of Models and Specifications >>
Lift, rotate, and control the pour of a drum with Morse Drum Carriers. Use these drum carriers with your hoist or crane to control the pour of drum contents, rather than simply dumping the entire contents with a drum inverter. The 185 and 195 Series are meant for overhead operation, while the 85 series is used for operation within reach. The drum can be tilted 360° in any direction while the drum faucet is in place. Standard models come with a pull chain drum tilt control. There's also a optional hand crank or 16" hand wheel to control the tilt of the drum. 
Power Drum Tilt Kontrol-Karriers:
195 Series: This unit has a Full Drum Capacity of 1,500 Lbs. and a Half-full capacity of 800 Lbs. Morse power-tilt Kontrol-Karriers for below-hook applications provide controlled drum tilt of 360° in both directions. AC powered models have 2-button pendant on 7’ cord. Air powered models have 3 position control valve on 12’ coiled hose. Handles 55-gallon steel drums. Use 55/30 Series Adaptors for smaller diameter steel or fiber drum. Ship dimensions: L 45” W 24” H 40”. Ships class 77.5 Ship weight: 400 Lb. assembled in wooden crate.
Manual Drum Tilt Kontrol-Karriers:
185 Series Standard Duty: This unit has a Full Drum Capacity of 800 Lbs., and a Half-full drum capacity of 500 Lbs.
Kontrol-Karriers, with gear and sprocket drive, provides easy pouring, with a 30:1 ratio controlled tilt. Economical for
occasional use with moderate loads.
185HD Series Heavy-Duty: This unit has a Full Drum Capacity of 1,500 Lbs., and a Half-full drum capacity of 800 Lbs. The 185HD Series provides efficient 60:1 reduction to make drum pouring easy with fine control. They are recommended for general use or when loads vary or could overload the standard duty model. The 185HD Series accept 55/30 Series Diameter Adaptors for smaller diameter drums.
185GR Series Extra Heavy-Duty: This unit has a Full Drum Capacity of 2,000 Lbs., and a Half-full drum capacity of 1000 Lbs. Extra-heavy-duty construction with steel tube framework, large shafts and bearings offer long life in tough service. An oil filled, worm gear speed reducer provides 60:1 gear reduction for fine control when tipping heavy drums. Model 185A-GR drum holder has two cinch chains and binders. Accepts adaptor for 30-gallon steel drum (Model 55/30-19GR). Model 185G-GR has 3-piece saddle drum holder. Model 185GM-GR has spark resistant parts made of
monel and 3-piece saddle.
185XGR Super Series Heavy-Duty: Morse Super Heavy-Duty below-hook drum carrier enables drum pouring at or above your reach. You control drum tilting 360° in either direction. Dispense drum contents with your hoist or crane. Even lift and invert a drum with drum faucet in place. This Super Heavy-Duty drum carrier has a pull chain to control the drum tilt with a 150:1 worm gear speed reducer and "extra heavy-duty" rating. Click here for a copy of this spec sheet >>
|
