Morse MFG Spark Resistant Models

Most Morse Drum Handlers Can Be Made Spark Resistant!

Morse drum handlers can be made with spark resistant parts. These spark resistant drum handlers are made using steel components for most of the structure, but spark resistant material for certain parts. "Spark resistant parts" are intended to reduce the possibility of mechanical sparks as a possible source of ignition. They are not a substitute for grounding and bonding for preventing static electricity discharges.

Metals such as Monel are used in the drum holder bands and at the lifting eyes. Stainless steel chain is used instead of carbon alloy steel chain across the front of the drum. Some models which include pull chains for the tilt-control drive have brass chain substituted for the steel chain. Monel contains about 66 percent nickle, and 31.5 percent copper, with small amounts of iron, manganese, carbon, and silicon. Stronger than pure nickel, Monel alloys have high strength and excellent corrosion resistance by many agents, including sea water, hydrofluoric acid, sulfuric acid, and alkalis. It is used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners, and heat exchangers.

The drum handler may or may not include electrical devices. The use of "spark resistant parts" is not related to the need for electrical devices to be in compliance with electrical codes. Morse drum handlers with "spark resistant parts" have not been submitted for "approval" by any agency. They should not be called "explosion proof" or "non-sparking."

Our volume discounts will save you money!

We provide low pricing, but if you find an advertised price
lower we will of course be happy to beat it.