Safety Solvent
Non Flammable Liquid
Cleans safely where water cannot be tolerated.
"Safety solvent reduces fire hazard."
Powerful safety solvent cleaner and degreaser has a high dielectric strength that makes it ideal for use as safety solvent around energized electrical equipment.
*Safety Solvent is "GREAT FOR DOWN TIME BECAUSE IT DRIES FAST"
Safety Solvent is safe for use on :
ALL TYPES OF METAL INCLUDING ALUMINUM, STONE, CONCRETE, FIBERGLASS, PAINTED SURFACES, AND MANY PLASTICS.
- Safety Solvent dries fast
- Safety solvents for use on all metals
- High dielectric strength
To clean electric motors in place, spray safety solvent directly into motor to flush out grease, carbon, dust, etc. Run motor until dry, then re-lubricate.
Motor may also be used be submerged in clean safety solvent and turned on for 3 to 5 minutes. Turn off current, remove motor from tank and allow to air dry thoroughly. Re-lubricate before use.
Electrical switches, fuse panels, contact points, printed circuits may be safely cleaned with this cold safety solvent degreaser.
Safety Solvent for use anywhere fast, clean and safe degreasing is required. Other uses include concrete and hard surface cleaning.
For use in areas where cleaning is needed but where water cannot be tolerated and a safety solvent is demanded.
Safety Solvent Dielectric strength (ASTM-D-877-80): 30 KV
View Aerosol Equivalent: Safety Solvent