Keep Sediment And Other Pollutants From Entering The Water System With Ultra-Drain Guard Catch Basin Inserts
Storm water pollution has become a major concern both locally and on a national level. Ultra Drain Guards remove waste from storm water before it can become a problem in the water system.
Click For Larger Image |
 |
Drain Guards Available
in Three Models:
- Oil & Sediment Model - Part #9217 Drain Guard (1-Pack), Part #9218 (10-Pack)
- Oil & Sediment Plus Model - Drain Guard Part #9219 (1-Pack), Part #9220 (10-Pack)
- Trash and Debris Model - Part #9227 Drain Guard (1-Pack), Part #9229 (10-Pack)
| |
Click For Larger Image
|
Click For Larger Image |
|
|
|
Helps comply with NPDES, 40
CFR 122.26 (1999) when used as Best Management Practice in Storm
Water Pollution Prevention Plans. |
Drain Guard Designed For Practical Use In: |
- Industrial Facilities - keep oil and other contaminants from
entering storm drains.
- Construction Sites - tubular design captures eroded soil and
wind-blown debris.
- Parking Lots, "Drive-Up" Retail Facilities -
polypropylene geotextiles collect oil, fuel and other contaminants
that drip from cars.
|
|
Unique PopUp Capacity Indicator*
Automatically Signals When It's Time To Install A New Ultra-Drain
Guard |
Click For Larger Image
|
Click For Larger Image
|
Click For Larger Image
|
| Heavy duty
magnet securely attaches the reusable indicator to the bottom of the
grate. |
A tether is
attached to a release hook which disengages when the Drain Guard has
reached its capacity. |
The bright red
end cap "pops up" through the grate to visually alert
maintenance personnel that the Drain Guard need to be emptied or
replaced. The spring-loaded device can be driven over even in the
"popped up" position. |
Click For Larger Image
|
Click For Larger Image
|
Click For Larger Image
|
| The Oil and Sediment Model
contains a replaceable oil absorbent pillow that removes oil and
grease from water flow as it passes through the Drain Guard. Choose
the non-leaching Rubber Particulate Pillow or the highly absorbent
Polypropylene Pillow. |
The Trash and
Debris Model is designed specifically to catch larger items such as
cigarette butts, candy wrappers and paper goods. |
The Sediment
Only Model removes dirt, sand and other sediment from stormwater.
Ideal for a construction site sediment control. |
* Note: The PopUp Capacity Indicator is not designed for use with the Trash and Debris Model.
U.S. Patent No. 5,372,714; 5,575,925
Call us at 1-800-474-7294 for low prices on Drain Guards
SPECIFICATIONS |
| |
Oil &
Sediment Model |
Oil &
Sediment Plus Model |
Trash &
Debris Model |
| Part #: |
9217
(1-Pack)
9218 (10-Pack) |
9219
(1-Pack)
9220 (10-Pack) |
9227
(1-Pack)
9229 (10-Pack) |
| Weight: |
1 lb. |
2 lbs. |
1 lb. |
| Dimensions: |
48" L x 36"
W x 18"H |
48" L x 36"
W x 18" H |
48" L x 36"
W x 18" H |
| Weight: |
1 lbs. |
2 lbs. |
1 lbs. |
| Performance: |
Oil: Up to
.87 gallons
Sediment: Up to 40 lbs. |
Oil: Up to
1.38 gallons
Sediment: Up to 40 lbs. |
1 cu. ft.
(before reaching bypass ports) |
| Accessories |
PopUp
Capacity Indicator (Part # 9236), Grate
Lifting Hook (Part # 9235), Retainers
(Part # 9237 or 9238) |
| |
* The total
water flow rate through the insert in
new condition is in excess of 500 gpm.
The bypass rate is approximately 700 gpm. |
|
|
|
|
The Ultra-Drain Guards have just
received approval from the
Washington State Department of Transportation!
Click here to read the letter.
(Adobe Acrobat required)
Ultra-Drain Guard®,
Reusable Model 
Capture Dirt and Sediment At
Construction Sites and Other "High Erosion" Areas
|
 
Click to enlarge
|
-
Rugged
polypropylene construction can be easily rinsed and reused.
-
Deep
accumulation pocket (36") can hold up to 500 lbs. of soil,
sand, sediment and dirt.
-
Designed
for easy removal with backhoe, forklift or other equipment.
|
|
U.S. Patent No. 5,575,925 |
Click to enlarge
|
SPECIFICATIONS |
| Part
# |
Dimensions |
Flow Rate |
| 9341 |
24" x 24" |
200 Gal/Min/Ft2 |
| 9340 |
24" x 36" |
200 Gal/Min/Ft2 |
| 9342 |
24" x 48" |
200 Gal/Min/Ft2 |
| Material
Specs |
|
Ultra-Drain Guard®,
Reusable Model, Curb-Style 
Stop Sediment in Storm water
Runoff From Entering Combination Drains
|
|
-
For use
with combination drains with a street grate and curb opening.
-
Large
accumulation pocket collects up to 500 lbs. of silt, dirt, sediment
and soil.
-
Built-in
barrier blocks storm water from entering curb-inlet, forcing water to
flow into street grate.
-
Curb inlet
barrier's 2 1/2" height allows overflow in heavy rainfall
events.
-
Helps
comply with NPDES, 40 CFR 122.26 (1999).
U.S. Patent No. 5,575,925 |
SPECIFICATIONS |
| Part
# |
Dimensions |
Flow Rate |
| 9332
Drain Guard |
24" x 24" |
200 Gal/Min/Ft2 |
| 9330
Drain Guard |
24" x 36" |
200 Gal/Min/Ft2 |
| 9331
Drain Guard |
24" x 48" |
200 Gal/Min/Ft2 |
|
See
More Ultra-Drain Guards - Page 2
|
