Water & Holding Tanks

Water & Holding Tanks
 
Water and Holding TanksTODD Water and Holding Tanks
Our standard size line of holding and water tanks has been expanded to help consumers meet Coast Guard requirements. Every water and holding tank is manufactured from polyethylene that complies with FDA regulation CFR 177.1520 and meets Coast Guard standards. Holding tanks have a heavier wall thickness than water tanks. All openings are female National Pipe Threads (NPT) The openings are all standard sizes and easily adapt to any boat. Each holding tank (shown) has two 1 1/2" openings and one 1/2" vent. Each water tank (not shown) has one 1 1/2" fill, one 1/2" vent and one 1/2" sup-ply opening. All openings are located in the same relative position on one end of the tank. Fittings are not included in the price of the tanks.
Water Tanks Holding Tanks
Gallons
3
6
9
13
15
20
25
35
55		 L
14"
16"
17"
24"
25"
30"
37"
36"
54.5"		 W
11"
12"
14"
10"
11"
16"
17 1/2"
15 1/2"
13"		 H
6 1/2"
8"
10"
14"
15"
10"
10"
16"
20"		 Product No.
85-1859W
85-1531W
85-1667W
85-1626W
94-1627W
85-1666W
85-1532W
85-1525W
85-1533W		 Gallons
3
6
9
13
15
20
25
35
55		 L
14"
16"
17"
24"
25"
30"
37"
36"
54.5		 W
11"
12"
14"
10"
11"
16"
17 1/2"
15 1/2"
13"		 H
6 1/2"
8"
10"
14"
15"
10"
10"
16"
20"		 Product No.
85-1859H
85-1531H
85-1667H
85-1626H
94-1627H
85-1666H
85-1532H
85-1525H
85-1533H

Fitting Relocation Kit for Water TanksFitting Relocation Kit for Holding TanksFitting Relocation Kit for Water Tanks (90-2218) or Holding Tanks (90-2219) The Fitting Relocation Kit enables a boater to plug up existing threaded fitting openings, and to custom position the new fitting openings anywhere on the tank. Each kit comes with a complete set of instructions.

 

Holding Tank Straight Pipe-to-Hose Adapter Kit (93-2220) and Holding Tank 90° Pipe-to-Hose Adapter Kit (93-2221) Water Tank Straight Pipe-to-Hose Adapter Kit (93-2222), Water Tank 90°Pipe-to-Hose Adapter Kit (93-2223) Kits include all fittings needed to attach hoses to a water or holding tank. All fittings screw into the tank. The opposite end of the fitting accepts the hose. Teflon tape is supplied for easy installation and to ensure a tight fit. Water Tank Kits include two 1/2" hose barbs, one 1-1/2" hose barb, teflon tape and instructions. Holding Tank Kits include one 1/2" hose barb, two 1-1/2" hose barbs, teflon tape and instructions.

Holding Tank Straight Pipe-to-Hose Adapter Kit (93-2220) and Holding Tank 90° Pipe-to-Hose Adapter Kit (93-2221) Water Tank Straight Pipe-to-Hose Adapter Kit (93-2222), Water Tank 90°Pipe-to-Hose Adapter Kit (93-2223)
ml>